Installing a SkyDry ceiling-mounted drying rack is easier than you might think. With just a few tools, you can transform your laundry routine and start drying clothes naturally in the warm air above. Here’s a simple guide to help you through the process.
What You’ll Need
Before you begin, gather the essentials:
- SkyDry kit (timber frame, pulleys, cotton rope, stainless screws, tensioners)
- Power drill & drill bits
- Screwdriver
- Stud finder (to locate ceiling joists)
- Ladder
- Pencil & tape measure
Step 1: Choose the Location
Pick a spot where SkyDry will work best for you. Popular choices include:
- Above the laundry area (convenient and practical)
- In the garage (space-saving, larger installs)
- Sunroom or porch (uses natural warmth and airflow)
- Holiday homes or ski huts (above fireplaces or heaters)
Tip: Ensure there’s enough clearance to lower the rack fully for loading and unloading.
Step 2: Mark and Drill Fixing Points
- Use a stud finder to locate secure ceiling joists.
- Measure and mark the positions for the pulley brackets at each end of where your SkyDry will hang.
- Drill pilot holes for the stainless screws.
- Step 3: Install the Pulleys and Frame
- Fix the pulleys securely into the joists using the stainless screws provided.
- Assemble the SkyDry timber frame on the ground if needed, then thread the cotton rope through the pulleys.
- Attach the frame to the rope, ensuring it hangs evenly.
Step 4: Add the Tensioner and Cleat
- Fit the rope tensioner to keep everything tight and secure.
- Install the rope cleat on the wall at a comfortable height so you can raise and lower the rack easily.
Step 5: Test and Adjust
- Slowly raise and lower the rack a few times.
- Adjust rope lengths or tension if needed to make sure the frame stays level.
- Check that the block-and-tackle pulley system makes lifting effortless, even when loaded with wet clothes.
Step 6: Hang Your First Load!
That’s it! Load up your washing, raise it into the warm air, and let SkyDry do its work. You’ll instantly free up floor space, reduce your power bill, and keep your laundry out of the way.
Professional Installation Option
If DIY isn’t your style, don’t worry, SkyDry offers professional installation across Auckland. Our expert installers will deliver, fit, and test your SkyDry so it’s ready to use with minimal disruption.
[Book Installation]
Final Tip
A SkyDry installation takes most people under two hours, and once it’s up, it will serve your family for years to come. With stainless hardware, durable rope, and carefully chosen timber, it’s a fixture that’s built to last a lifetime.